Focus on heavy equipment
Focus on heavy equipment
Mineral slag dryer is widely used for drying slag, mineral, iron ore, chrome concentrate, lithium ore slag, copper concentrate, limestone, etc.
Mineral slag dryer is widely used for drying slag, mineral, iron ore, chrome concentrate, lithium ore slag, copper concentrate, limestone, etc.
Zhengzhou Jiutian is currently the most professional and most authoritative enterprise engaged in the research and development of drying equipment in China. The mineral slag (ore) dryer is meticulously researched and developed for drying mineral slag, ore powder, limestone, slurry, and other materials. After more than 20 years of drying practice and researches, it has been continuously improved. With its advanced technology, high efficiency, low energy consumption, stable operation, and easy operation and maintenance, safety and environmental protection, praised by users, more than 100 sets of drying equipment are perfectly operating in China and around the world. This type of equipment is widely used in cement, mining, building materials, chemicals, food, metallurgy, chemical, fertilizer production, slag, clay, and other industries. The equipment can be customized according to the type of material, depth of precipitation and user needs to meet the individual needs of each user.
Mineral slag dryer is mainly composed of hot air furnace, belt conveyor, rotary drum dryer, belt conveyor, induced draught fan, cyclone dust collector, bag dust collector (or wet dust collector) and operation control system. The equipment adopts the fair current (or countercurrent) drying process.
Widely used for drying slag, mineral, iron ore, chrome concentrate, lithium ore slag, etc.
After the wet material enters the drying drum, it enters the following working areas: the first is the material guide area. The slag enters this area and contacts with the high-temperature hot air, and the moisture evaporates quickly; the second is the lifting plate area. The slag is lifted and dropped in this area and lifted up to form a material curtain state. At this time, the material is fully in contact with the hot air. The moisture in the slag evaporates quickly and peels off into water vapor. The water vapor is immediately extracted by the induced draft fan to achieve the purpose of drying the slag; the slag is dried in this area to a loose state with a moisture content of less than 5% (or lower). After heat exchange, the material reaches the required moisture state. The third is the discharge area. The drum is not equipped with a lifting plate in this area, and the material rolls to the discharge port in this area to complete the entire drying process.
GET QUOTE
| Model | Output (T/D) | Moisture content of raw material (%) | Final moisture content (%) | Total Power (kw) | Area (m²) |
|---|---|---|---|---|---|
| JTHG1916 | 300 | 20-30 | <5 | 120 | 8*26 |
| JTHG2218 | 500 | 20-30 | <5 | 160 | 10*35 |
| JTHG2520 | 700 | 20-30 | <5 | 200 | 10*40 |
| JTHG2820 | 1000 | 20-30 | <5 | 290 | 12*40 |
| JTHG3430 | 1500 | 20-30 | <5 | 420 | 15*46 |
| JTHG4032 | 2000 | 20-30 | <5 | 500 | 15*50 |
| Note: The production capacity of the equipment is directly related to the proportion of mineral slag to reduce the moisture, the precipitation ratio is large, and the equipment production capacity is reduced accordingly. Specific consulting firm. | |||||
Custom design production solutions? Get a quote? Get product details? Leave us a message and we'll get back to you within 24 hours.
