Focus on heavy equipment
Focus on heavy equipment
Sand is an important building material. Whether it is m-sand or natural sand, the water content is relatively high. However, sand used in construction requires less than 3% moisture. Therefore, a sand dryer is needed to reduce the moisture content of sand.
Sand dryer is an industrial-grade drying equipment, it can dry river sand, silica sand, quartz sand, ore powder, coal ash and various of materials. The sand dryer has a significant drying effect. Sand with a moisture content of 10% can reduce to 1%, and the mineral slag with a moisture of 18% can reduce to 2%. It is a very important equipment in construction industry.
The sand drying line mainly include: sand washing machine, hot-air furnace, feeding and discharging equipment, drying drum, conveying equipment, cooling system, dust removal system, control system, etc. When working, the wet sand washed by the sand washing machine is fed into the feeding port by a belt conveyor, and the drying medium (air or flue gas) is heated by a hot air stove. It is then fed into the drying drum in a forward or backward flow and comes into contact with the wet sand. The cylinder is equipped with a feeding plate that lifts the sand while rotating, ensuring full contact between wet sand and heat medium, and removing moisture. Dry sand is discharged from the discharge outlet after cooling.
According to different processing capacities, there are many models of sand dryers with processing capacities ranging from 5 tons to 100 tons per hour. Regarding the different heat sources used and site conditions, we can develop a customized plan and layout for you.
If you are interested in our sand dryer or if you have any other questions, please feel free to contact us. We will reply within 24 hours.
Many mineral processing plants face a confusing problem: even with the same processing capacity, some copper concentrate drying lines consume far more fuel and power than others. The energy gap usually reaches 20%–40% in actual operation. The difference i
Utilizing boiler exhaust gas (120°C–180°C) from a power plant as the heat source for a fly ash dryer is a core strategy for reducing costs in fly ash recovery projects. However, three key issues must be addressed in practice:
Freshly washed sand retains too much surface moisture, unsuitable for direct storage, transportation or end-use processing. For sand production plants, professional sand drying equipment is essential to consistently reduce moisture and qualify finished sa
In the slag processing industry, traditional drying equipment often suffers from issues such as low thermal efficiency, rapid heat loss, and poor sealing, resulting in significant energy waste and high drying costs. In reality, the key to overcoming these
Custom design production solutions? Get a quote? Get product details? Leave us a message and we'll get back to you within 24 hours.
